The U97-H2 Mini-Cat® is KVVM + Audio + Serial over UTP (Cat5/5e/6) extension system. The U97-H2 Mini-Cat® extends 2 separate Video signals, Keyboard, Mouse, Audio, and RS-232 over 2 UTP (Cat5/5e/6) cables up to 500 feet. It allows a local user and a remote user to work on the same PC at different times. The remote user can be up to 500 feet away from the PC connected via 2 UTP (Cat5/5e/6) cable. The Receiver also has digital video compensation to compensate for signal loss at longer cable lengths. The Sender unit also has and external switch to allow only local, remote, or either station control. The Sender unit has 2 LED's to inidcate which station, local or remote, currently has control. Made in the USA.

The U97A Mini-Cat® is KVM + Audio over UTP (Cat5/5e/6) extension system. It allows a local user and a remote user to work on the same PC at different times. The remote user can be up to 500 feet away from the PC connected via a UTP (Cat5/5e/6) cable. The Receiver also has digital video compensation to compensate for signal loss at longer cable lengths. The Sender unit also has and external switch to allow only local, remote, or either station control. The Sender unit has 2 LED's to inidcate which station, local or remote, currently has control. Made in the USA.

The UU-150 uses one UTP (Cat5/5e/6) cable to extend a USB port up to 150 feet. No power supply is required at either the sending or receiving unit. The UU-150 is compliant with the USB 1.1 standard and supports full PnP installation. It supports data transfer rates up to 12 Mbps.

The UU150-4 is a USB 1.1 over Category 5/5e/6 USB extender with a 4-port Hub built into the remote unit. The kit includes a local unit and a remote unit. The local unit comes with a short cable that is used to plug into the USB port of any PC. The remote unit connects to the local unit via cat5 cable that can be upto 150 ft long. Neither side requires a power supply, though the remote unit has the option for plugging in a separate supply if the USB devices require too much power. The unit is compatible with most USB devices such as USB Cameras, printers, scanners, etc. The unit is a simple plug-and-play device which does not require any special software.

The UU-2X4 uses one UTP (Cat5/5e/6) cable to extend 2 USB ports up to 350 feet. On the remote side, each extended USB port terminates into a 4-port USB hub. This allows up to 4 USB devices to be connected to each extended USB port for a total of 8 ports.

For applications that may have more than 1 high speed streaming USB peripheral requirements, the Dual-Port pipe access to the PC allows the user to connect each of the high speed devices to a dedicated group at the remote location, and still have 3 extra ports open on each group for other USB devices such as keyboards, mice, memory sticks, printers, etc.

The UU-2X4 provides all the flexibility of an extended range USB in a ready-to-use package. The UU-2X4 is fully compliant with the USB 1.1 Specification and supports low-speed (1.5 Mbps) and full-speed (12 Mbps) USB data transfer rates.It delivers all of the benefits of USB, including remote device powering, plug and play operation, and cross-platform flexibility. Made in the USA.

The CUTP-Z-1000-BLK is a 1,000 foot spool of Zero Skew UTP cable which allows for video signals to be transmitted long distances without video skew being introduced by the cable. Made in the USA.

The CUTP-ZP-1000-BLK is a 1,000 foot spool of Plenum Zero Skew UTP cable which allows for video signals to be transmitted long distances without video skew being introduced by the cable. Made in the USA.

The SKU-RGB allows for skew correction to be made to the individual RGB colors of a VGA or component video (Y Pb Pr) signal that has been transmitted over UTP (Cat5/5e/6) cable. The digital skew compensation is adjusted via easy to use buttons on the unit. Made in the USA.

The VSA-31 Mini-Cat® is a 3 input A/V Switcher on a 4-gang wallplate transmitter and remote receiver. The VSA-31® provides individual buttons for turning the projector on/off and selecting the video source for display. It sends the selected AV to a remote receiver unit via 2 Cat5 Cables. No power supply is needed for the wallplate. The remote unit can be up to 750 ft away and has a built-in 12 Watt Stereo Amp which can drive a pair of 8 or 16 ohm speakers directly. A line output is provided for connection to an external amp if necessary. A Volume knob on the wallplate allows adjustment of the sound level. The VSA-31® automatically controls projector operation (on/off and source selection) via serial commands stored in the unit by just the touch of a button.